Filter
Top Products
5 CALLING, RECEIVING
5-12
5. If you want to send a proposal, rotate the [ENTER] knob to choose RE-SEND and then
push the [ENTER] knob.
DSC FREQ : 12M-INTL
GO TO ALL VIEW
STATION ID :
001234567
REASON: NO REASON
GIVEN
STATION ID: 001234567
CALL TYPE : UNABLE
ACKNOWLEDGEMENT
**
Compose message
**
a) Push the [ENTER] knob to open the CALL TYPE menu.
b) Rotate the [ENTER] knob to choose ABLE and then push the [ENTER] knob.
c) Prepare message as appropriate and then press the [CALL] key to transmit the message.
After you receive acknowledgement from the other party you can start communications.
Manually acknowledging individual call with “ABLE”
1. When an individual call is received and the equipment is set up with manual
acknowledge (MANUAL ACK)and comply type “ABLE,” the alarm sounds and the
display looks like the one below.
Individual request
call received.
FROM SHIP:
121234567
ROUTINE
TELEPHONE CH 401
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as shown below.
MAR-23-2002-23:00:00 ECC: OK
INDIVIDUAL REQUEST
FROM SHIP:
001234567
ROUTINE
TELEPHONE CH 401
Received message
ANSWER ALL VIEW
To view contents, rotate [ENTER] knob
to choose ALL VIEW and then push
[ENTER] knob.
3. Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob. Push
the [ENTER] knob again to open the CALL TYPE menu.
STATION ID : 001234567
COM. TYPE : TELEPHONE
COM. FREQ : CH 401
CALL TYPE : ABLE
ACKNOWLEDGEMENT
DSC FREQ : 4M-INTL
GO TO ALL VIEW
ABLE
UNABLE
**
Compose message
**