Filter
Top Products
5 CALLING, RECEIVING
5-14
Manually acknowledging individual call with “UNABLE”
1. When an individual call is received and the equipment is set up with manual
acknowledge, the alarm sounds and the display shows the message "Individual request
call received."
Individual request
call received.
FROM SHIP:
121234567
ROUTINE
TELEPHONE CH 401
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
INDIVIDUAL REQUEST
FROM SHIP:
121234567
ROUTINE
TELEPHONE CH 401
*
Received message
*
ANSWER ALL VIEW
MAR-23-2002-23:00:00 ECC: OK
To view contents, rotate [ENTER] knob
to choose ALL VIEW and push the
[ENTER] knob.
3. Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob.
4. Push the [ENTER] knob to open the CALL TYPE menu.
TO SHIP : 001234567
COM. TYPE : TELEPHONE
COM. FREQ : CH401
CALL TYPE : ABLE
ACKNOWLEDGEMENT
DSC FREQ: 4M-INTL
GO TO ALL VIEW
ABLE
UNABLE
**
Compose message
**
5. Rotate the [ENTER] knob to choose UNABLE and then push the [ENTER] knob.
6. Push the [ENTER] knob to open the REASON menu.
DSC FREQ :
12,577.5 KHZ
CALL TYPE : UNABLE
REASON : NO REASON
TO SHIP :
001234567
ACKNOWLEDGEMENT
GIVEN
NO REASON
BUSY
EQUIP DISABLE
MODE NOT USABLE
CH NOT USABLE
**
Compose message
**
7. Rotate the [ENTER] knob to choose an appropriate reason and then push the [ENTER]
knob.