Filter
Top Products
11 NBDP TRANSMITTING, RECEIVING
11-5
Stopping transmission
1. Press the function key [F3] and then the [4] key. “Canceled Sending” appears on the
screen. Transmission is stopped but the line is still connected.
2. To disconnect the line, press the [F10] key.
11.3 FEC Mode Operation
The FEC mode transmits the same data twice to yield less errors. Compared to the ARQ
mode, the FEC mode is better at communicating with weak signals.
1. Press the function key [F3].
2. Press the [1] key to display the Call Station menu.
3. Choose a station which is registered for the FEC mode. Press the [Enter] key.
“CONNECT” appears in reverse video.
4. Transmit a message directly from the keyboard, or do the following to transmit a
message stored on a floppy disk:
Press the function key [F3] and the [3] key to choose File to Send. Choose file to send and
then press the [Enter] key.
5. After the message is transmitted, press the function key [F10] (Break) to disconnect
the line.
11.4 Choosing Receive Mode
1. Press the function key [F3] and then the [6] key.
2. Choose receive mode:
AUTO: Automatic reception in ARQ or FEC mode
ARQ: International radiotelex ARQ mode
FEC: International radiotelex FEC mode
DIRC: Receive message from teleprinter
3. Press the [Enter] key. The reception mode appears on the screen.
All received (and transmitted) messages are saved to a floppy disk when "TX/RX Msg
Save" is ON in the System menu. The file is automatically named as follows.
02 01 13 0 0. X X X
Year datemonth
Serial number from 000