Filter
Top Products
12 MAINTENANCE & TROUBLESHOOTING
12-10
12.9.4 Diagnostics
General diagnostics
1. Press the function key [F6] to display the System menu.
Setup
Slave Delay
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Display Mode*
Self Test
Lock Change Default
8 msec (0- 50 msec)
OFF O N
OFF O N
OFF UTC SMT JST
2002/10/16 10:00:00
Normal Reverse
System
* = Window Color shown on IB-583.
System menu
2. Choose Change from Setup.
3. Choose Self Test (at the bottom of the screen).
4. Press the [Enter] key. The results of the self test are displayed a short time later.
Selftest
Terminal Unit Test : ver. X.XX :OK
Main Unit Test : ver. X.XX :OK
Modem Unit Test : ver. X.XX :OK
Radio Unit Test : ID FS1570*1 :OK
DSC Unit Test : ID FS1570*1 :OK
Printer Unit Test*2: :OK
X.XX = Version No.
*1: Or FS2570
*2: "NG" and "Printer not ready" when printer is off or
is abnormal.
IB-58X
MAIN Board
NBDP Modem
Self test results
The test results are shown as OK or NG (No Good). For any NG, try the self test again. If it
appears again, call for service. When the test is completed, the message “Selftest
Completed. Press any key to escape.” appears.