Filter
Top Products
5 CALLING, RECEIVING
5-5
6. Rotate the [ENTER] knob to choose appropriate priority (normally ROUTINE) and then
push the [ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE menu.
CALL TYPE
STATION ID
PRIORITY
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: ROUTINE
: NO INFOR
: 2M-INTL
TELEPHONE
NBPD-ARQ
NBDP-FEC
Routine or
Business Priority
For Safety or
Urgency Priority
COM. TYPE
:
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
DATA
MAIN
V32
V21
V26 BIS
V22
V26 TER
V22 BIS
V27 TER
V23
TELEPHONE
NBDP-ARQ
NBDP-FEC
SPECIAL
Push [ENTER]
knob to display.
**
Compose message
**
GO
8. Rotate the [ENTER] knob to choose communications type desired and then push the
[ENTER] knob.
9. For routine and business priority, push the [ENTER] knob to open the COM. FREQ
menu. For safety and urgency priority, go to step 11.
CALL TYPE
STATION ID : 123456789
PRIORITY
COM. TYPE
DSC FREQ
: INDIVIDUAL
: 12M-INTL
COM. FREQ
FREQUENCY
CHANNEL
POSITION*
NO INFO
GO TO ALL VIEW
* POSITION is displayed if a coast
station is specified at step 3.
**
Compose message
**
10. Rotate the [ENTER] knob to choose communication frequency setting method desired
and then push the [ENTER] knob. For FREQUENCY and CHANNEL, see “How to Set
Working Frequency, Channel” on the next page. NO INFO and POSITION let the
receiving station set the working frequency. Choose NO INFO or POSITION to send the
call to a coast station; FREQUENCY or CHANNEL to send the call to a ship station.