Filter
Top Products
1 OPERATIONAL OVERVIEW
1-6
3. Push the [ENTER] knob to open the INPUT TYPE menu.
**
Position setup
**
INPUT TYPE: AUTO
LAT : 34
° 41 NORTH
LON : 135
° 30 EAST
TIME: 09: 00 UTC
AUTO
N
MANUAL
Note 1: If, when INPUT TYPE is AUTO, input from the navigator is interrupted, the
message “EPFS error!” appears. If this occurs, check the navigator.
Note 2: When INPUT TYPE is MANUAL, the message “Warning: Update position”
appears at set intervals (update interval selected with POSITION OLDER on
the Alarm menu) to ask you to update position.
4. Rotate the [ENTER] knob to choose MANUAL and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the latitude input window. Use the numeric keys to
enter latitude. If necessary, switch coordinates: [1] key to switch to North; [2] key to
switch to South. Push the [ENTER] knob.
**
Position setup
**
INPUT TYPE: MANUAL
34˚ 41
LON : 135
° 30 EAST
TIME: 09: 00 UTC
LAT : 34° 41 NORTH
12
34 ° 30 NORTH
12
34°30 NORTH
NORTH: [1] KEY
SOUTH: [2] KEY
After last digit
is entered
6. Push the [ENTER] knob to open the longitude input window. Use the numeric keys to
enter longitude. If necessary, switch coordinates: [1] key to switch to East; [2] key to
switch to West. Push the [ENTER] knob.
**
Position setup
**
INPUT TYPE: MANUAL
LAT: 34˚ 41 NORTH
LON : 135˚ 30 EAST
TIME: 09: 00 UTC
LAT : 34
°
30 NORTH
LON : 135
°
30 EAST
12
135
°
30 EAST
12
135
°
30 EAST
EAST: [1] KEY
WEST: [2] KEY
After last digit
is entered
7. Push the [ENTER] knob to open the time input window.
INPUT TYPE: MANUAL
LAT : 34˚ 41 NORTH
LON : 135˚ 30 EAST
TIME : 09: 00 UTC
LAT : 34
°
30 NORTH
LON : 135
°
30 EAST
TIME: 09: 00 UTC
12 : 34
Position setup
8. Enter UTC time with the numeric keys and then push the [ENTER] knob. The Setup
menu appears.
9. Press the [CANCEL] key to return to the DSC standby screen.