Filter
Top Products
9-1
9 NBDP PREPARATIONS
This chapter provides the procedures necessary for preparing the NBDP Terminal Unit for
transmitting and receiving. For automatic telex, you will need to register the following:
• Your ship's ID and answerback codes
• Stations
• Timer programs
• Scan channel groups
• User channels
9.1 Registering Answerback Code & ID Codes
Enter your ship's answerback code and ID codes as shown below.
Note: The answerback and ID codes cannot be changed once entered; be sure to enter the
codes correctly.
9.1.1 Registering answerback code
1. Press the function key [F5] and then the [5] key. The display should look something like
the illustration below.
Answerback Code
_
Answerback Code Entry
Answerback code entry screen
2. Enter your ship's answerback code (max. 20 characters, including spaces) and press the
[Enter] key. The prompt “OK/Cancel” asks for verification of data. If the code is correct,
press the [Enter] key again.
Note: Example of answerback code: 12345789 FURU X.