Filter
Top Products
2
Introduction
The Nokia 9210i Communicator consists of two parts: the phone and the
communicator interface. The phone is on the device cover and the communicator
interface is inside the cover, both as shown in Figures 1 and 2.
Figure 2
Both these parts use the same information from the memory of the communicator
- they are not separate devices. For example, the phone uses the names and phone
numbers stored in the Contacts directory of the communicator interface, and the
communicator interface uses the phone for voice and data communications, for
example, when sending and receiving faxes and connecting to the Internet.
Tip: The communicator
interface has no power on/
off button - it switches itself
on when you open the cover
and switches off when you
close the cover.
The communicator interface contains many organiser and communications
applications. The large keyboard, command buttons, and display make using the
applications easy.
communicator
interface
Built-in speaker
Large colour Active
Matrix TFT LCD screen
Linda1.book Page 2 Friday, April 12, 2002 8:31 PM