Filter
Top Products
27
General information
To insert special characters from the keyboard
There are two ways to insert special characters directly from the keyboard.
To insert characters printed on the keys in green, press and hold the Chr key and
simultaneously press a key with a special character printed in green.
To generate special characters by using certain unmarked keys, for example, “a”
and “e”, do as follows:
1 Press and hold the Chr key and simultaneously press a letter key. The first
special character matching the letter key is displayed.
2 Continue to hold down the Chr key and press the letter key again. The second
special character is shown in place of the first one, and so on, until the first
character is shown again.
Press Shift or the Caps lock key to change the case of the special character.
Shortcuts
Tip: Many shortcuts are
also displayed next to menu
commands in applications.
There are several shortcuts you can use in the document applications. The
shortcuts vary depending on the application used. The following table lists some
of the available shortcuts:
Shortcut Function
Ctrl + a
Ctrl + c
Ctrl + x
Ctrl + v
Ctrl + z
Selects all
Copies selected text
Cuts selected text
Pastes selected text
Undoes (the last action)
General_information_Iss3.doc Page 27 Friday, October 18, 2002 5:37 PM