Filter
Top Products
238
Extras
5 In the field What type of modem do you want to install? select Other. Click Next
6 Select the option Don’t detect my modem; I will select it from a list
7 Click Have disk...
8 Click Browse and locate the CD-ROM drive with the Nokia 9210i CD-ROM.
9 On the CD-ROM, locate a folder Software for PC/Modem drivers
10 In the Modem drivers folder, select Mdmn9210i.inf file and click Open or OK.
Tip: To use High Speed
connection, your GSM
operator must activate High
Speed Data Services on your
SIM card.
11 In the Install from disk dialog, Click OK.
12 In the Install New Modem dialog, select Nokia 9210 Communicator (Cable). If you
are using High Speed connection (HSCSD), select a speed higher than 9600 bps
and cable connection. Click Next.
13 Select the COM port where the serial cable is connected. Click Next.
14 Click Finish.
15 Remove the CD-ROM from the drive.
16 In your communicator, press the Extras application button, select Fax modem,
and press Open.
17 In the Fax modem application, press Settings
18 On the Connection page of the Fax modem settings, define the following:
Connection type: Cable
Transfer rate: 19200 or higher. Make sure that this setting is the same both in
your communicator and your PC.
Data bits: 8
Stop bits: 1
Flow control: Software
Press Done.
Note: Transfer rate is the speed with which the data is transferred between
your communicator and PC. The best transfer rate for normal GSM
calls is 19200 or higher. For high speed calls, you should select
115200. Select the same rate in your PC application as well.
Linda1.book Page 238 Friday, April 12, 2002 8:31 PM