Filter
Top Products
33
General information
When printing via infrared, make sure that the infrared port of the communicator
faces the infrared port of the printer. Keep the infrared connection clear. If the
connection is obstructed for too long, for example, if something is moved between
the infrared sensors or the communicator is moved, printing is interrupted. For
details on infrared connection, see page 35.
Log
Log contains information about the communication history of your communicator.
The log shows all, or certain types of communication events in chronological order.
With log files you can monitor your communications, use the information to create
or complete contact cards, or reply directly to the sender in the log.
Tip: The shortcut to open
the log is Shift+Ctrl+L.
Figure 12
Tip: To change the
categories Date and time and
Duration to Subject and
Status, press < and > on the
Arrows key.
To access the log
You can access the log from the Menu of several applications.
Press the Menu key and select Tools > Log.
To make use of an individual communication event
1 Choose a log event and press Use. The command buttons change.
General_information_Iss3.doc Page 33 Friday, October 18, 2002 5:37 PM