Filter
Top Products
239
Extras
19Your communicator is now ready to be used as a fax modem. Press Activate to
activate the Fax modem.
Fax modem settings
To open Fax modem, press the Extras application button, select Fax modem, and
press Open
Note that an active PC connection using the fax modem is disconnected after 20
minutes if no data is sent or received. However, an active call is not automatically
disconnected.
Note: You cannot change fax modem settings if the fax modem is activated. To
change these settings, make sure that fax modem is not active.
Open Fax modem and press Settings. A dialog with two pages opens.
Define the following:
Connection page
Connection type: Press Change to change this option. The options are Infrared and
Cable. If you select Infrared, the rest of the options are automatically set.
If you select Cable, define also the following:
Transfer rate: The speed with which the data is transferred between your
communicator and PC. The best transfer rate for normal GSM calls is
19200. For high speed calls, you should select 115200. Select the same
rate in your PC application as well.
Data bits: Defines how many bits are used to form a byte. The default option, 8, can
typically be used.
Linda1.book Page 239 Friday, April 12, 2002 8:31 PM