Samsung SagaTM_BJ18_PM_102208_F6 Cell Phone User Manual


 
157
Turning Bluetooth On/Off
1.
Tap Start located in the upper left corner of the screen.
2. Tap Settings . By default, the Personal tab is highlighted.
3. Tap the Connections tab.
4. Tap Bluetooth and then tap the Mode tab.
5. Tap or clear the “Turn on Bluetooth” check box. The Bluetooth radio is
turned on or off depending on your selection.
6. Tap to save your changes and return to the previous screen.
Discoverable Mode
When your Saga™ is discoverable, other devices will automatically detect it while
searching for compatible Bluetooth wireless technology enabled devices with which
to connect. Your phone must be on and you have to turn on the embedded Bluetooth
radio.
When the discoverable mode is active, a message displays when another device
attempts to establish a bond or connect with your phone. You must accept the
incoming beam to exchange data or information with other compatible Bluetooth
wireless technology enabled devices.
Making your Saga™ Discoverable
To set your phone to be discoverable by other devices, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings . By default, the Personal tab is highlighted.
3. Tap the Connections tab.
4. Tap Bluetooth and tap the Mode tab.
5. Place a checkmark in the “Turn on Bluetooth” check box by tapping the
screen.
6. Place a checkmark in the “Make this device visible to other devices
check box.
Other common devices can now detect your device and attempt to beam
information to it, establish a connection, or use a Bluetooth service.
7. Tap to save your changes and return to the previous screen.
Note: If you do not want your Saga™ to be discoverable, clear the “Make this device discoverable to other
devices” check box.
ok
ok