Filter
Top Products
OnCell G2150I AT Command Set GPRS Commands
10-12
mode), if MT result code buffer is full, the oldest ones can be discarded.
Defined events:
The following unsolicited result codes and the corresponding events are defined:
+GEV: REJECT <PDP_type>, <PDP_addr>
A network request for PDP context activation occurred when the MT was unable to
report it to the TE with a +CRING unsolicited result code and was automatically
rejected.
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network has requested a context reactivation. The <cid> that was used to
reactivate the context is provided if known to the MT.
+CGEV: NW DEACT <PDP_type>, <PDP_addr>, [<cid>]
The network has forced a context deactivation. The <cid> that was used to activate
the context is provided if known to the MT.
+CGEV: ME DEACT <PDP_type>, <PDP_addr>, [<cid>]
The mobile equipment has forced a context deactivation. The <cid> that was used
to activate the context is provided if known to the MT.
+CGEV: NW DETACH
The network has forced a GPRS detach. This implies that all active contexts have
been deactivated. These are not reported separately.
+CGEV: ME DETACH
The mobile equipment has forced a GPRS detach. This implies that all active
contexts have been deactivated. These are not reported separately.
+CGEV: NW CLASS <class>
The network has forced a change of MS class. The highest available class is
reported.
+CGEV: ME CLASS <class>
The mobile equipment has forced a change of MS class. The highest available class
is reported.
GPRS Network Registration Status: +CGREG
Description: The set command controls the presentation of an unsolicited result code +CGREG:
<stat> when <n>=1 and there is a change in the MT’s GPRS network registration status, or code
+CGREG: <stat>[,<lac>,<ci>] when <n>=2 and there is a change of the network cell.
The read command returns the status of result code presentation and an integer <stat>
that shows whether the network has currently indicated the registration of the MT. Location
information elements <lac> and <ci> are returned only when <n>=2 and MT is registered in the
network.
Command syntax:
Command Possible responses
AT+CGREG=[<n>] OK
+CGREG: stat>[,<lac>,<ci>]
AT+CGREG? +CGREG: <n>,<stat>[,<lac>,<ci>]
OK
+CME ERROR: <err>
AT+CGREG=? +CGREG: (list of supported <n>s)
OK
Defined values:
<n>:
0: disable network registration unsolicited result code
1: enable network registration unsolicited result code +CGREG: <stat>