Filter
Top Products
OnCell G2150I AT Command Set MOXA Proprietary Commands
11-4
Automatic PIN Entry: *USEPIN
Description: This command enables/disables the automatic PIN code entry function when
G2150I is booting up
Command syntax: AT*USEPIN=<n>, <PIN Code>
Command Possible responses
AT*USEPIN=1, 1234
Note: 1234 is an example of PIN code
OK
Note: Done
AT*USE RPIN =0
Note: Automatic PIN entry is disabled
OK
Note: Done
AT*USEPIN? *USEPIN: (0, 1)
Defined values: <n>
0: Automatic PIN Entry is disabled
1: Automatic PIN Entry is enabled
Notes:
The PIN code will be used in the booting process. If PIN is not entered correctly,
system will automatic disable the auto-entry function to avoid the SIM to be locked.
Example
AT*USEPIN=1,000
*USEPIN: 0
OK
AT*USEPIN=1,000
OK
AT
OK
AT*USEPIN=0
OK