Filter
Top Products
OnCell G2150I AT Command Set GPRS Commands
10-20
Command Possible responses
AT+WGP RS?
Note:
- Automatic re-attachment at init
not activated
- Automatic reactivation of PDP
context at init not activated
- 3 PDP contexts, and automatic
reactivation
only for Cid 1
- PPP silent mode activated
- GPRS class is 8
- GPRS slow connect activated
- PPP filtering activated
- Automatic re-attachment and PDP
reactivation at operator border areas
+WGPRS: 0,0
+WGPRS: 1,0
+WGPRS: 2,1,1
+WGPRS: 2,0,2
+WGPRS: 2,0,3
+WGPRS: 2,0,4
+WGPRS: 3,1
+WGPRS:4,8
+WGPRS:5,1
+WGPRS:6,1
+WGPRS:7,1
OK
Defined values:
<mode>: a numeric parameter that specifies a G2150I GPRS parameter.
0 ATTACH-STATUS (the ME don’t make automatically a GPRS attachment after
init)
1 PDP-INIT-STATUS (declare some PDP contexts liable to be activated
automatically after initialization by <mode>=2)
2 Set ACTIVABLE automatically after init a define PDP context
3 PPP silent mode
4. Definition of the GPRS multislot class.
5 Slow CONNECT for PALM® OS
6 PPP Filtering
7 Automatic GPRS roaming inter-operator: if activated, ME automatically re- attaches
itself to the network and reactivates its PDP context by changing operator when
reaching border areas.
Notes:
If <mode>=0, 1, 3, 4, 5, 6or 7 <cid> and <class> values will be ignored.
If <mode>=0, 1, 2, 3, 5 or 6, <class> value will be ignored.
If <mode>=4, <parameter> and <cid> values will be ignored. G2150I must be
restarted to take the modification into account.
PPP Filtering is a test-purpose functionality. It avoids sending on the radio link