Filter
Top Products
OnCell G2150I AT Command Set Short Message Commands
7-19
AT+CMGR=10 +CMGR: “REC
UNREAD”,”+33660669023”,,”03/02/13,18:36:35+00”<CR><LF>
Do you want to change state ?
OK
Note: The state hasn’t be updated
AT+WUSS=0 OK
+CMTI: “SM”,11
Note: SMS has been received in index 11
AT+CMGR=11 +CMGR: “REC
UNREAD”,”+33660669023”,,”03/02/13,18:56:55+00”<CR><LF>
It is me again.
OK
AT+CMGR=11 +CMGR: “REC
UNREAD”,”+33660669023”,,”03/02/13,18:56:55+00”<CR><LF>
It is me again.
OK
Note: The state has been updated
AT+WUSS? +WUSS: 0
OK
AT+CMGR=10 +CMGR: “REC READ”, “+33660669023”,, “03/02/13,18:56:55+00”
<CR><LF>
It is me again.
OK
Note: The state has been updated
AT+WUSS? +WUSS: 0
OK
Defined values: <mode>
1 The SMS Status will not change.
0 The SMS Status will change.
Copy Messages: +WMCP
Description: This command copies the SMS from the SIM to the Flash or from the Flash to the
SIM.
Command syntax: AT+WMCP=<mode>[,<loc>]
Command Possible responses
AT+WMCP=? +WMCP: 0,(1-12)
+WMCP: 1,(1-99)
OK
Note: The location of the SMS that can be copied from
the SIM to the flash is 1 to 12 (maximum available in
the SIM). The location of the SMS that can be copied
from the flash to the SIM is 1 to 99 (the maximum
available in the flash).
AT+CPM S?
Note: Read the SMS storage
+CPMS: “SM”,3,10,”ME”,0,99,”SM”,3,10
OK
Note: Read, write…SMS from/to SIM. 3 SMS are stored
in SIM. 10 is the total memory available in SIM. No
SMS in Flash