Filter
Top Products
OnCell G2150I AT Command Set MOXA Proprietary Commands
11-6
Serial Port Configuration: *SERIAL
Description: This command configures the serial port settings
Command syntax:
AT*SERIAL=<n>,<baudrate>,<data bits>,”<parity>“,<stop bits>,”<flow control>“
Command Possible responses
AT*SERIAL? *SERIAL: (0, 1)
AT*SERIAL=? *SERIAL=: (0, 1), (baudrate, data bits, parity, start bits, flow
cntrl)
AT*SERIAL=1, 9600,7, “E”, 1,
“N”
OK
Note: Done
Defined values:
<n>:
0: Disable automatic serial settings
1: Enable automatic serial settings
<baudrate>: <300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200>
<data bits>: <7, 8>
<parity>: <n, e, o, s, m>
n: None parity
e: Even parity
o: Odd parity
s: Space parity
m: mark parity
<stop bits>: <1, 2>
<flow control>:
None: None for flow control
HW: RTS/CTS flow control
Note:
If serial port manager function is enabled, all serial port related AT commands will be
monitored, any changes will recorded automatically. These commands includes
AT+IPR/AT+ICF/AT+IFC/ATE0/ATE1.
Example
AT
OK
AT*SERIAL=1,115200,8”N”,1,”N”
OK