Filter
Top Products
OnCell G2150I AT Command Set MOXA Proprietary Commands
11-7
SMS Tunnel Mode: *SMS
Description: This command configures the SMS Tunnel mode settings
Command syntax:
AT*SMSIN=<encoding>,<receive phone 1>,<receive phone 2>
AT*SMSOUT=<encoding>,<target phone 1>,<target phone 2>
AT*SMSTUN=<n>
AT*SMSIO=<x>, <y>
Command Possible responses
AT*SMSOUT? *SMSOUT: (0, +886289191230,
+8886289191231)
AT*SMSOUT=0, +88689191230,
+88689191231
OK
Note: Done
AT*SMSIN? *SMSIN: (0, +886289191230,
+8886289191231)
AT*SMSIN=0, +88689191230,
+88689191231
OK
Note: Done
AT*SMSTUN? *SMSTUN: (0, 1)
AT*SMSTUN=1 OK
Note: Done
AT*SMSIO? *SMSIO: (0,1), (0,1)
AT*SMSIO=0, 1 OK
Note: Done
Defined values:
<encoding>: format of the send/receive short message format
0: 7 bits text format
1: 8 bits binary
2: 16 bits Unicode (UCS2) format
<receive phone 1>: <phone numbers in internal format starts with “+”>
<receive phone 2>: <phone numbers in internal format starts with “+”>
<target phone 1>: <phone numbers in internal format starts with “+”>
<target phone 2>: <phone numbers in internal format starts with “+”>
<n>:
0: Disable SMS Tunnel mode
1: Enable SMS Tunnel mode
<x>: State of SMS-IN
0: Disable SMS-IN
1: Enable SMS-IN
<y>: State of SMS-OUT
0: Disable SMS-OUT
1: Enable SMS-OUT
Example
AT
OK
AT*SMSOUT=0,+886289191230,+886289191231