Filter
Top Products
OnCell G2150I AT Command Set General Commands
3-2
Manufacturer Identification: +CGMI
Description: This command gives the manufacturer identification.
Command syntax: AT+CGMI
Command Possible Responses
AT+CGM I
Note: Get manufacturer
identification
WAVECOM MODEM
OK
Note: Command valid, Wavecom modem
Defined values: No parameters
Request Model Identification: +CGMM
Description: This command is used to get the supported frequency bands. With multi-band
products the response may be a combination of different bands.
Command syntax: AT+CGMM
Command Possible Responses
AT+CGMM
Note: Get hardware version
MULTIBAND 900E 1800
OK
Note: Multi-band: GSM 900 MHz extended band and DCS
1800 (default configuration).
AT+CGMM
Note: Get hardware version
900E
OK
Note: 900 extended
AT+CGMM
Note: Get hardware version
1800
OK
Note: DCS
AT+CGMM
Note: Get hardware version
1900
OK
Note: PCS
AT+CGMM
Note: Get hardware version
G850
OK
Note: GSM 850
AT+CGMM
Note: Get hardware version
MULTIBAND G850 1900
OK
Note: Multi-band: GSM 850 and PCS
Defined values: No parameters