Filter
Top Products
OnCell G2150I AT Command Set V24-V25 Commands
9-6
Defined values: <n>
0: DCE transmission result code
1: Result codes are suppressed and not transmitted
DCE Response Format: V
Description: This command determines whether or not the DCE response format uses the
header characters <CR><LF>, and the result codes are provided as numeric or verbose.
Command syntax: ATV<n>
Command Possible responses
ATV0
Note: DCE transmits limited headers and
trailers and numeric result codes
0
Note: Command is valid (0 means OK)
ATV1
Note: DCE transmits full headers and trailers
and verbose response text
OK
Note: Command valid
Defined values:
<n>=0 <n>=1
<text><CR><LF> <CR><LF>
<text><CR><LF>
Information responses
Result codes
<numeric code><CR> <CR><LF>
<verbose code><CR><LF>
Default Configuration: Z
Description: This command restores the configuration profile. Any call is released.
Command syntax: ATZ
Command Possible responses
ATZ Ok
Note: Command valid
Defined values: No parameter
Save Configuration: &W
Description: This commands writes the active configuration to a non-volatile memory
(EEPROM).
Command syntax: AT&W
Command Possible responses
AT&W
Note: Writes current configuration to EEPROM
OK
Note: Command valid
Defined values: No parameter