Filter
Top Products
OnCell G2150I AT Command Set Short Message Commands
7-18
Command Possible responses
AT+CPM S?
Note: Check the storage area
+CPMS: “SM”,3,10,”SM”,3,10,”SM”,3,10
OK
AT+CMGW=“+33146290800”<CR>
Hello how are you ?<ctrl-Z>
Note: Write a message in text mode
+CMGW: 4
OK
Note: Message stored in index 4 in the SIM
AT+WMGO=? +WMGO: (1-10) OK
Note: Possible values for the SIM
AT+WMGO=4 OK
AT+CMGW=“+33146290000”<CR>
You are overwritten<ctrl-Z>
+CMGW: 4
OK
Note: New Message stored in index 4
AT+WMGO? +WMGO: 4
OK
Note: The value was used, so re-initialization
AT+WMGO=4 OK
AT+CPMS=“SM”,”ME”,”SM” +CPMS: 3,10,0,99,3,10
OK
Note: Change the storage area from SIM to Flash
AT+WMGO=? +WMGO: (1-99) OK
Note: Possible values for the Flash
AT+WMGO? +WMGO: 0
OK
Note: We changed the storage area, so the value
was reinitialized
AT+WMGO=999 +CMS ERROR: 321
Note: if the storage area is changed with the AT+CPMS command, the value of WMGO will be
reset to 0.
Defined values: <loc> location number of the SMS to write or overwrite. Number depends on the
SIM or Flash memory capacity.
Un-change SMS Status: +WUSS
Description: The +WUSS command allows keeping the SMS Status to UNREAD after +CMGR
or +CMGL.
Command syntax: AT+WUSS=<mode>
Command Possible responses
AT+WUSS=? +WUSS: (0-1)
OK
AT+WUSS=1 OK
+CMTI: “SM”,10
Note: SMS has been received in index 10
AT+CMGR=10 +CMGR: “REC
UNREAD”,”+33660669023”,,”03/02/13,18:36:35+00”<CR><LF>
Do you want to change state ?
OK