Filter
Top Products
OnCell G2150I AT Command Set GPRS Commands
10-4
AT+CGQREQ=? +CGQREQ: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s),
(list of supported <reliability>s) , (list of
supported <peak>s), (list of supported
<mean>s)
[<CR><LF>+CGQREQ: <PDP_type>, (list of
supported <precedence>s), (list of supported
<delay>s), (list of supported <reliability>s) ,
(list of supported <peak>s), (list of supported
<mean>s)
[…]]
OK
AT +CGQREQ=1,1,4,5,2,14 OK
AT+CGQREQ=[<cid> [,<precedence >
[,<delay> [,<reliability.> [,<peak>
[,<mean>]]]]]]
OK
ERROR
AT+CGQREQ? +CGQREQ: <cid>, <precedence >, <delay>,
<reliability>, <peak>, <mean>
[<CR><LF>+CGQREQ: <cid>, <precedence
>, <delay>, <reliability.>, <peak>, <mean>
[…]]
OK
Defined values:
<cid>: numeric parameter that specifies a particular PDP context definition.
Range of values is 1 to 3
<precedence>: numeric parameter that specifies the precedence class
0: Subscribed precedence (subscribed by the Network by default if value is omitted)
1: High priority (service commitments shall be maintained ahead of precedence class 3.)
3: Low priority (service commitments shall be maintained after precedence classes 1 and
2)
<delay>: numeric parameter which specifies the delay class
0: Subscribed
1: Delay class 1
2: Delay class 2
3: Delay class 3
4: Delay class 4
Delay (maximum values)
SDU size: 128 bytes SDU size: 1024 bytes
Delay Class
Mean
Transfer
Delay (sec)
95 percentile
Delay (sec)
Mean
Transfer
Delay (sec)
95 percentile
Delay (sec)
Subscribed Subscribed by the Nwk / default if value is omitted 0
1. (Predictive)
< 0.5 < 1.5 < 2 < 7
2. (Predictive) < 5 < 25 < 15 < 75
3. (Predictive) < 50 < 250 < 75 < 375
4. (Best Effort) Unspecified