Filter
Top Products
OnCell G2150I AT Command Set Result Codes, Failure Causes,, and Other Tables
A-9
+CLIP: <number>, <type>
[,,,<alpha>]
As verbose Incoming Call Presentation
+CMT: <oa>… (text
mode)
or +CMT: [<alpha>,]… (PDU)
As verbose Incoming message directly
displayed
+CMTI: <mem>,<index> As verbose Incoming message stored in <mem>
(“SM”) at location <index>
+CREG: <stat> [,<lac>,<ci>] As verbose Network registration indication
+CRING: <type> As verbose Incoming call type (VOICE,
FAX ...)
+CSQ: <RxLev>,99 As verbose Automatic RxLev indication with
AT+CCED=1,8 command
+CSSU: <code2>[<number>,<type>] As verbose Supplementary service notification
during a call
+STIN: <ind> As verbose
(specific)
SIM ToolKit Indication
+WIND: <IndicationNb> [,<CallId>] As verbose
(specific)
Specific unsolicited indication (SIM
Insert/Remove, End of init,
Reset, Alerting, Call
creation/release)
+WVMI: <LineId>,<Status> As verbose
(specific)
Voice Mail Indicator notification
(cf. +CPHS command)
+WDCI: <LineId>,<Status> As Verbose
(specific)
Diverted call indicator
RING 2 Incoming call signal from network
+CIEV As Verbose
(specific)
Indicator event reporting
Final Result Codes
Verbose Result Code Numeric (V0
set)
Description
+CME ERROR: <err> As verbose Error from GSM 07.05 commands
+CMS ERROR: <err> As verbose Error from SMS commands (07.07)
BUSY 7 Busy signal detected
ERROR 4 Command not accepted
NO ANSWER 8 Connection completion timeout
NO CARRIER 3 Connection terminated
OK 0 Acknowledges correct execution of a
command line
RING 2 Incoming call signal from network