Filter
Top Products
160 Chapter 6
Configuration - Screens and Control Fields
Setting the Date and Time Turning Off User Messages
Configuring the Instrument
Setting the Date and Time
The Test Set has a built-in clock that keeps track of the date and time.
It is powered by an internal battery to keep it operating when the
instrument is off.
To set the date and time
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Select the Date field and use the DATA ENTRY keys to enter
the date (MMDDYY -- October 31, 1997 = 103197).
Step 3. Select the Time field and use the DATA ENTRY keys to enter
the time (HH.MM -- 2:13 pm = 14.13).
Changing the Beeper’s Volume
The beeper alerts you to important operating and measurement
conditions. It beeps any time a message is displayed at the top of the
screen. These messages warn you of conditions such as exceeding the
RF input level or trying to set a field to an unacceptable value.
Therefore, it is recommended that you do not disable the beeper.
To change the beeper’s volume
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Select the Beeper field to display the volume choices.
Step 3. Select the desired choice.
Turning Off User Messages
To turn off user messages
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Set the Display User Mssgs field to No
.
To display user messages
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Set the Display User Mssgs field to Yes
.
Main Menu