Toshiba STRATA DK16 Cell Phone User Manual


 
PROGRAMMlNGPROCEOURES-INSTRUCTIONS/SYSTEMRECOROS
SECTION 100-816-302
MARCH1993
another program
more data
nr;;lnr;;lnnnnni-l,,,nnHoll~~*.*~!lSlllllr;;lr;;llHDll!~T;;1T;;1~
Step 1 7777
Enter Program Mode Enter Program Number
Enter Program Data 7
Exit Current Program
Exit Program Mode
L
See Notes
0
(LED buttons)
FIGURE 2-2
PROGRAMMING BUTTON SEQUENCE OVERVIEW
The System Record contains programming forms for
Programs 00 - 97.
A System Record should be
filled out for each system installed as detailed in Chapters 1 and 2.
Each System Record Sheet is supplemented with a guide at the top of it for entering data from it. The
guide illustrates the button sequence a programmer must press, with the exception of sequences common
to all programs, e.g., entering programming mode (P), exiting current program (Z), and exiting programming
mode (Z). To save space, these common sequences are coded, as illustrated above. The Spkr and Hold
buttons are also coded “S” and “H,” respectively, to save space.
NOTES:
1. Programs 90, 92, and 03 are out of order and placed in front purposely because they must always be completed first and
in this order. Upon completing these steps, begin with Program 00.
2. Do not Press Intercom when entering Step 1.
2-43