Filter
Top Products
119
MD Evolution – Dialog 4223 Professional
Attendant-Based Services
When you activate this general calls acceptance service on your
extension, not only will you receive your personal calls, but also
your facility’s general calls.
These will be presented to you in the same way as usual, with the
external calling party’s information displayed on your screen. See
the “Operations for Incoming Calls” section.
You will, however, be able to distinguish them from your personal
calls with a specific message such as:
• I. DIRECT or I. UNUSED NUMBER for a call received on your
facility’s general number, or on non-assigned DID numbers,
• I. NO ANSWER FROM <Name> for a call re-directed when an
identified internal user does not answer,
• I. BUSY ON <Name> for a call re-directed when an identified
internal user’s line is busy.
You may then process each call just as you would one of your
personal calls.
To activate or deactivate the general calls acceptance service on
your extension, from an idle extension:
Menu Press the Menu key.
The following screen is displayed when you are granted access to
the programming of your extension.
GEN_CALL Press the dynamic function key shown on the left.
You will receive confirmation of the activation or deactivation of this
service.
í Press the “C” key to end the programming.
If your extension was initially inactive in relation to the general calls
acceptance service – as shown above the function key’s label –
your extension will now be active (or vice versa).
When your general calls acceptance status is active, this will also
be indicated on your idle extension by the letters “GC” displayed on
the first line of the screen.
L1 Aastra-00164477500 GC 2
I. NO ANSWER FROM SMITH Peter-405
REDIAL CALLERS PICKUP NAME >
Programming
disabled enabled disabled disabled
GEN_CALL GROUP LOCK CALL_FWD >