Filter
Top Products
55
MD Evolution – Dialog 4223 Professional
Call Forwarding Services
IMMEDIATE Press the dynamic function key shown on the left to define an
immediate call forward for your extension.
You may also define any other type of variable call forward, just as
you would if you were at your own extension by selecting one of
the other dynamic function keys available.
The third party set displays the requested type of call forward, and
then prompts you to enter the number for the call forward recipient;
in this case it is the extension number where you are located.
FWD NO z Dial your present internal extension number.
CONFIRM Press the dynamic function key shown on the left to confirm
the number you entered.
The third party set then prompts you to enter your user password.
PASSWORD z Finally, enter your user password.
By default, your user password is “1234”, however you may have
modified it. See also the “Programming Your Extension” section.
Your password is displayed in asterisks.
The following screen confirms the call forward programming.
í Press the C key on your extension to exit the third party set
programming mode.
The third party set defined as the recipient of your call forwards
returns to idle status, and the call forwarding from your extension
that you just defined is effective immediately.
Call-Fwd ÖÔ Just as it would if you had defined it from your own extension, your
extension’s Call-Fwd key will flash.
You may then cancel this call forward from your extension, in the
same way as you would a variable call forward activated directly
from your own extension (see previously mentioned details).
You may also cancel it from the recipient extension, according to
the aforementioned procedure, this time selecting the “CANCEL”
dynamic function.
Remote CFW immediate OF 420
Number : _
BLANK CURSOR+ CONFIRM RETURN
FRI 20-APR 15:28
L1 Password _
L1 420 -> 480****
ALL CALL FORWARD ACCEPTED