Filter
Top Products
27
MD Evolution – Dialog 4223 Professional
Operations for Outgoing Calls
Automatic Call-Back on No-Answer
Condition
When placing a call to an internal party whose extension is “FREE”,
but your call remains unanswered, you may activate the automatic
call-back on no-answer condition for the called extension.
To do so:
CALL_BACK Press the dynamic function key shown on the left.
d or í Replace the handset or press the “C” key to end the call in
handsfree mode.
You will be automatically called back when your called party has
demonstrated his/her renewed presence, typically by placing a new
call from his/her extension.
Then, once you have answered this call-back, your internal called
party will be automatically re-rung.
Notes:
An automatic call-back is typically valid for 15 minutes.
When this timeframe expires, if your called party has not
affirmed his/her presence, the service will be automatically
cancelled. When you are called back, you typically have
30 seconds to answer the automatic call-back service. If
you do not answer within that timeframe, the automatic call-
back is automatically cancelled.
With both services, you receive visible and audible confir-
mation that you have successfully registered the automatic
call-back on busy or no answer condition.
Your extension may also be subject to the automatic call-
back on busy or on no-answer service from third party sets.
L1 SMITH Peter-405
FREE
DTMF VPAGING CALL_BACK FLASH >
Automatic callback
REDIAL CALLERS PICKUP NAME >