2G. microSD Card 115
microSD Card
back cover and battery, see “Battery and Charger”
on page 18.
Inserting the microSD Card
1. Insert a coin or other flat object into the slot at the
bottom of the battery compartment cover and lift
up gently to remove.
2. Lift the battery out at the notch just below the
camera lens, and then set it aside.
3. Locate the latch at the bottom center of the battery
compartment, and then lift the latch to unlock the
microSD card slot.
Note: You can easily damage the microSD card by improper
operation. Please be careful when inserting, removing,
or handling the microSD card.
Make sure your battery is fully charged before using
the microSD card. Your data may become damaged
or unusable if the battery runs out while using the
microSD card.