Filter
Top Products
144 2I. Bluetooth
Reconnecting a Headset or Car Kit
When you have paired a headset with your device, you
should be able to reconnect it automatically by turning
on Bluetooth on your device and then turning on the
headset. However, sometimes you will need to
reconnect manually, for example if you have been
using your headset with another Bluetooth device.
1. Press > , and then tap Settings > Wireless &
networks > Bluetooth settings.
2. If Bluetooth is not switched on, tap the Bluetooth
check box to switch it on.
3. Make sure that the headset is discoverable.
4. Tap the headset’s name in the Bluetooth devices
section.
5. If prompted to enter a passcode, try 0000 or 1234,
or consult the headset or car kit documentation to
find the passcode.
If you still cannot reconnect to the headset or car kit,
follow the instructions in “Disconnecting or Unpairing
From a Bluetooth Device” in this chapter, and then
follow the instructions in “Connecting a Bluetooth
Headset or Car Kit.”
Disconnecting or Unpairing From a
Bluetooth Device
To disconnect a Bluetooth device:
1. Press > , and then tap Settings > Wireless &
networks > Bluetooth settings.
2. In the Bluetooth devices section, tap the device to
disconnect.
3. Tap Disconnect.
To unpair from a Bluetooth device:
You can make your device forget its pairing connection
with another Bluetooth device. To connect to the other
device again, you may need to enter or confirm a
passcode again.
1. Press > , and then tap Settings > Wireless &
networks > Bluetooth settings.
2. In the Bluetooth devices section, tap the device to
unpair.
3. Tap Unpair.