Filter
Top Products
176
4. Enter your current zip code and tap
Done
. This zip code
must correspond to the location of your desired TV and
set top box.
5. From the
Find your TV service
screen, select a service
provider from the available channel listing.
6. From the
Choose your TV Brand
screen, tap your TV’s
manufacturer name.
•
If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either
Other TV Brands
or
I Have a Projector
.
7. Aim your device at the TV and tap (
Power
) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note:
The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
8. If the TV turned on, tap
Yes
.
– or –
If the TV did not turn on after tapping (
Power
)
and waiting 10 seconds, tap
No
or
Retry
.
9. From the
Choose Your TV Tuner
screen, select the entry
that corresponds to your current channel control
method:
• Cable/Satellite/STB/PVR/DVR
: selected when changing
channels is done via a receiver box. Channels are not changed
via the TV remote but rather through the receiver/box.
• My xxx TV
: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box’s remote.
Note:
Try matching your current channel selection method.
10. Select the Satellite Box Brand from the available list.
For example, DirectTV
®
.
•
If your brand does not appear in the list, tap
Other Satellite
Box Brands
and follow the on-screen instructions.
Important!
You must configure your set top box for IR
communication with your device. If you do not
select
More Info..
below and follow the on-screen
instructions you may not be able to properly use
the application.