Filter
Top Products
18
13. Accept the current device name.
– or –
Tap the
Device name
field and use the on-screen
keyboard to rename your device.
Important!
The device name is also used to provide an
identification for your device’s Bluetooth and Wi-Fi
Direct names.
14. Tap
Finish
to complete the setup process.
15. Read the on-screen Collect diagnostics information.
Note:
This software collects only diagnostic data from your
device so that T-Mobile technicians can better
troubleshoot issues with your device.
16. Select either
More Info
(to read additional information)
or
Close
to close the message screen.
Important!
Selecting
Close
only closes the current description
screen and does not disable data collection.
To disable data collection, go to
Settings
➔
Accounts
tab ➔
Backup and reset
➔
Collect
diagnostics
and turn off the
Allow diagnostics to be
collected
feature. For more information, refer to
“Collect Diagnostics” on page 323.
Switching the Device On or Off
Once the device has been configured, you will not be
prompted with setup screens again.
To turn the device on:
Ⅲ
Press and hold (
Power/End
) until the device
switches on.
The device searches for your network and after finding
it, you can make or receive calls.
Note:
The display language is preset to English at the factory.
To change the language, use the Language menu. For
more information, refer to “Language and Input
Settings” on page 305.