Filter
Top Products
178
This feature allows you set the phone to automatically switch to
power saving mode when the battery is low and configure
additional power saving options.
1. Press and then tap (
Settings
)
Power
saving mode
. Tap Use Power saving mode. A check mark
displayed at the right side and in the status bar
indicate active status.
To adjust power saving options:
1. Activate power saving mode (see above).
2. Tap
Power saving on at
to assign the “battery low” level at
which the power saving mode is activated (10% battery
power, 30%, 50% or 70%.
To activate additional power saving features:
1. Activate power saving mode (see above).
2. Tap any of the available fields to adjust additional power
saving parameters.
• Turn Off Wi-Fi
to disable Wi-Fi when it is not connected to a
router.
• Turn Off Bluetooth
to disable Bluetooth when not in use or
actively transmitting data.
• Turn Off GPS
to disable the GPS location system when not in
use.
• Turn off Sync
to disable the feature when the phone is not
synchronizing with the server.
• Brightness
to enable screen brightness adjustment.
• Brightness
to adjust the brightness of the screen. For more
information, refer to
“Adjusting Screen Brightness”
on
page 177.
• Screen timeout
to adjust the time delay before the screen turns
off when inactive.
• Power saving tips
display additional information on the power
saving features.