100 2I. microSD Card
Inserting the microSD Card
1. Gently uncover the microSD slot located on the left
side of the device.
2. Position the microSD card with the label side
facing up and slide it into place until it is fully
inserted and locked in place.
microSD Icon Indicators
The following icons show your microSD card
connection status at a glance:
- microSD card has been unmounted from the
device and is safe to remove.
- microSD card is being prepared for use and for
mounting.
microSD Adapter
The supplied microSD adapter allows you to use
microSD cards in other SD-compatible devices, like
computers, cameras, and printers. Before using the
microSD card with an SD-compatible device, you will
need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
ᮣ With the label side of the microSD card facing up,
insert the card into the supplied microSD adapter,
and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
ᮣ Hold the front edge of the microSD card, and
gently pull it out to remove it from the adapter.
Note: Be sure to use only recommended microSD cards (up
to 32GB). Using non-recommended microSD cards
could cause data loss and damage your device.
Note: DO NOT remove a microSD card while files are being
accessed or transferred. Doing so will result in loss or
damage of data. Make sure your battery is fully charged
before using the microSD card. Your data may become
damaged or unusable if the battery runs out while
using the microSD card.