Filter
Top Products
52 Using Your Treo 700w Smartphone
CHAPTER 3 Using Your Phone
Making a conference call
When the second call is outgoing, you can join two calls in a conference
session. Additional charges may apply and minutes in your mobile
account may be deducted for each active call. Please contact Verizon
Wireless for more information.
1. Put the first call on hold, and then place a
second call.
2. Press Conference (left action key);
this joins the two active calls in a
conference.
3. When you’re done, press End
Conference (left action key); this
ends the second call and returns you to
the first call. If you’re ready to hang up
both calls, press Power/End instead.
Using Flash mode during an Active call
Flash mode is an alternate way to manually manage your calls while
one or more calls are active. The preferred methods are described in
“Making a second call” on page 50, “Answering a second call (call
waiting)” on page 51, and “Making a conference call” on page 52.
When these methods don’t work, you can use Flash mode. This mode is
often used during a conference call when one of the calls has ended but
the other remains connected.
1. Press Phone/Send from the Active Call screen.
2. Select Send Key (Flash).
Tip
If
*
72 and
*
73
do not turn call
forwarding on and
off, please contact
Verizon Wireless to
obtain the forwarding
codes for your area.
After you turn on call
forwarding, call your
smartphone to
confirm that call
forwarding is active.