Filter
Top Products
Getting Started 6
2.
Plug the adapter’s power plug into a standard AC wall outlet.
3. When charging is finished, first unplug the adapter’s power plug from the AC wall outlet and then disconnect
the wall charger’s connector from the phone.
Note:
Failure to unplug the wall charger before you remove the battery can cause the phone to become damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone sounds and the “Low battery”
message repeats at regular intervals on the display. In this condition, your phone conserves its remaining battery
power, not by turning off the backlight, but by entering the dimming mode.
When the battery level becomes too low, the phone automatically turns off.
Switching the Phone On or Off
1. Press and hold the key until the phone switches on.
2. If the phone asks you to enter the phone password, use the keypad to enter this password and touch
Confirm
.
3. If the phone asks for a PIN, use the keypad to enter the PIN and touch
Confirm
. For more information, refer to
“Check PIN code” on page 127.
The phone searches for your network and after finding it, the service provider name displays on the upper
center of your display. Now you can make or receive calls.
Note:
The display language is preset to English at the factory. To change the language, use the Language menu. For more information,
refer to “Language” on page 125.
4. When you wish to switch off the phone, press and hold the key until the power-off image displays.
Warning! Your touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive force or
a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. For more
information, refer to “Warranty Information” on page 141.