Filter
Top Products
Managing Your Device 247
Hard reset
You can also perform a hard reset (also known as a full reset). A hard
reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs
you installed, data you entered, and settings you customized on your
device will be lost. Only Windows Mobile® software and other pre-installed
programs will remain.
Warning! Your device will be set back to factory default settings. Make sure that
any additional installed programs and/or user data have been backed up
before you perform a hard reset.
To perform a hard reset
1. Pull out the stylus.
2.
With the device turned on, press and hold the VOLUME DOWN and
ENTER buttons, then press the RESET button with the stylus tip.
3.
Release the RESET button, but continue pressing the VOLUME DOWN
and ENTER buttons until you see this message on the screen:
This operation will delete
all your personal data,
and reset all settings
to manufacturer default.
Press VolUp to restore
manufacturer default, or
press other keys to cancel.
4. Release the VOLUME DOWN and ENTER buttons, then press the
VOLUME UP button to perform the hard reset, or press any other
button to cancel the reset.