Filter
Top Products
4948
1 Press [Options] while monitoring a
subject in the video camera mode,
select Shooting Time and press
O.
2 Select a recording time from 5
Sec., 10 Sec., 20 Sec., 30 (50 or
60) Sec. or Maximum and press
O.
Note: The available maximum recording
time is displayed when Maximum is
set. This time varies according to the
video data quality. The higher the
quality is, the shorter the recording
time is.
Taking a photo with a frame (For still
camera only)
You can add a frame to a photo before
it is taken. Note that when a photo is
taken with a frame, you cannot
remove the frame afterwards. Image
setting must be on QQVGA, or QVGA.
1 Press [Options] while monitoring a
subject, select Image Settings and
press O, and then select Frame
and press O.
2 Select ON and press O. A frame
appears.
3 Press [Prev.] or [Next] to change
the frame pattern and press O to
select.
Changing the photo (video data)
saving size
You can select photo (video data) size
to store. The larger the size is, the
better the data quality is.
1 Press [Options] while monitoring a
subject, select Image Settings
(Video Settings) and press O, and
then select Image Size and press
O.
2 Select a photo size (video data
size) and press O.
Notes:
•You can also press w while the still
camera or video camera is activated, and
the data size will change as follows:
• In the still camera mode: QQVGA
(120*160) → QVGA (240*320) → VGA
(640*480) → SXGA (1280*960,
unavailable for the front camera lens) →
Back to QQVGA (120*160) again.
• In the video camera mode: SQCIF
(128*96) → QCIF (176*144) → Back to
SQCIF (128*96) again.
Adding special effects to a photo/
video
You can make the subject look
different by adding special and artistic
effects.
1 Press [Options] while monitoring a
subject, select Image Settings
(Video Settings) and press O, and
then select Special Effects and
press O.
2 Select ON and press O. The
screen turns to Sepia colour.
3 Press [Prev.] or [Next] to change
the special effects and press O to
select.
4 The available patterns are: Sepia,
Black and White, Red, Green, Blue,
Purple and Negative.
Inserting time and date (Date
Stamp) (For still camera only)
This function enables you to add time
and date to a QQVGA or QVGA sized
still image.
1 Press [Options] while monitoring a
subject, select Image Settings and
press O, and then select Date
Stamp and press O.
Using the Still and Video Camera Using the Still and Video Camera