Filter
Top Products
135134
Video calls
Setting the method to switch a
video call to a voice call
If you have made a video call to a
person whose phone does not have
the function, you must switch to a
voice call. You can set the switching
method to automatic or manual.
1 Open the Reconnection Method
display.
•Press [Menu]
→ → Video
Call Settings
→ Reconnection
Method
2 Select Auto or Manual and press
O.
• If you select Manual, you will be
asked if you want to switch to a
voice call. If you select Auto the
call is automatically switched to a
voice call.
Setting an image to send
1 Open the Image Settings display.
•Press [Menu]
→ → Video
Call Settings
→ Image Settings
2 Select an image setting option and
press O.
Image Priority: Changes the image
quality based on transmis-
sion options, High Speed,
Normal or High Quality.
Send Own Image: Specifies if your
own image is sent to
callers.
Alternate Video: Sets the alternative
video to send instead of
your own image.
Setting whether your voice is sent
or not
1 Open the Voice Setting display.
•Press [Menu]
→ → Video
Call Settings
→ Voice Setting
2 Select an option and press O.
ON: Sends your voice to the
other party.
OFF: Cancels sending your voice
to the other party.
Setting the Auto Answer for a video
call
This function (available only with the
use of a headset) enables you to
receive video calls without touching
any keys after the preset ringing time.
Registering callers’ numbers is
required before activating this function.
For setting the Auto Answer for the
voice call function, refer to “Setting the
Auto Answer (Voice Call Auto Answer)”
under the Call settings section. (See p.
129.)
1 Open the Auto Answer display.
•Press [Menu]
→ → Video
Call Settings
→ Auto Answer
2 Press [List], select New and press
O.
3 You can copy phone numbers from
the Call History, Address Book, and
so on, by pressing [Options] and
selecting Get number. Use the
navigation keys and O to select.
4 When you finished selecting a
number, a list of the registered Auto
Answer numbers appears.
5 Confirm the phone number is in the
list and press [Done].
6 Select ON and press O.
Settings Settings