Sanyo S750i Cell Phone User Manual


 
173172
step 6 of “Sending data via
Bluetooth from the Media Album.”
see p. 169.)
Receiving data
You must switch the Bluetooth mode
on to receive data from another device.
•To switch the Bluetooth mode on,
press and hold O. Make sure
appears in the phone’s display. Save
the data when the transmission is
finished.
Exchanging Owner Information
You can send and receive Owner
Information data between your phone
and another PC, PDA or mobile phone.
The following example indicates an
exchange between your S750i and a
PC. The initiator is your S750i.
You must activate Bluetooth mode on
your PC before performing the
following.
Note: While your S750i is in Bluetooth
mode and the other device has been
registered in your Connection List,
your Owner Information will be
automatically sent if requested by a
registered device.
Your S750i
1 Press O
Bluetooth
Exchange Owner Info
2 Press [Search].
3 Select the PC device and press O.
4 Once prompted to save to the
Connection List, press [Yes].
5 Enter a Bluetooth Password (Must
match the PC you are connecting
with) and press O if you have not
already saved it in the Connection
List.
Refer to steps 1 and 2 below for
PC side operations.
6 Select Save and press O to save
the data received from the PC on
your S750i.
PC (Bluetooth enabled)
1 On the PC's display, enter your
Bluetooth Password (Must match
the S750i you are connecting with)
after the authentication prompt for
connection with your S750i
appears.
2 Select the owner information and
begin the exchange.
Note: Refer to your PC's user guide for
details on Bluetooth operations.
Regarding other generic Bluetooth devices
such as mobile phones:
You may be required to save your S750i in
the connection list on the other device.
Enter the Bluetooth Password if prompted.
The timing of being prompted to save
your S750i in the connection list and save
the owner information on the other device
may be different depending on the device.
For smooth operation you may need to
respond quickly to another device's
Bluetooth Password prompt as the
Bluetooth timeout of that device may
occur quickly.
Do not press any keys while data is being
exchanged or disconnection of
transmission may occur.
Using the Bluetooth headset
The Bluetooth headset can be
wirelessly connected to the phone,
and allows you to make and receive a
call handsfree. Read your Bluetooth
headset user manual before using. For
additional information, download and
view the Bluetooth Headset Guide
from the ‘Service’ ‘Downloads’
section at
http://www.sanyo-
mobile.com.
Configure both devices
1 Activate the Bluetooth pairing
mode on the Bluetooth headset.
2 On your S750i, press O
Bluetooth Connect to Hands-
free
3 Press [Search].
Connectivity Connectivity