Sanyo S750i Cell Phone User Manual


 
9392
A Secure Digital Memory card (SD
Card) is a compact and portable
memory storage device. The S750i
enables you to use an SD Card to
store photos, video images, sounds,
contacts, and downloaded data that
have no restrictions. This is convenient
for transferring to a personal computer
as well as printing images directly from
the SD Card using the DPOF printing
function. You can also access the SD
Card content by pressing the left soft
key when using the Media Album.
Caution: It is strongly recommended that
you keep a backup copy of the
data stored on the card as an
unexpected occurrence may
result in the data being lost.
Notes:
An SD Card which has been
formatted by another device such as
a personal computer may not
operate correctly with the S750i. Try
re-formatting from the handset. (See
p. 93 “Formatting the SD Card”)
Inserting the SD Card
1 Make sure that the phone is turned
OFF.
2 Open the cover of the SD Card slot
as shown in the diagram.
3 With the label side facing towards
the front, insert the SD Card slowly
into the card slot.
4 Push the card in until a click is
heard.
5 Close the card cover.
6 Turn the phone on.
7 Check if the icon
has appeared
on the display to indicate that a
card is inserted. If not, try inserting
the card again from the beginning.
Removing the SD Card
1 Make sure that the phone is turned
OFF.
2 Open the cover of the SD Card
slot.
3 Push the card slightly in and then
release. The card will then spring
out from the card slot.
4 Pull out the card and close the card
cover.
Formatting the SD Card
Before using a new SD Card which
has not yet been formatted or a card
which has been used in a PC or other
device, use this function to format the
card. Note that all the data stored on
the card is deleted when you format it.
1 Press [Menu], highlight
and
press O, then select Memory
Settings and press O.
2 Select Memory Card and press O,
then select Format Memory Card
and press O.
3 Enter your security code and select
[Yes] at the confirmation display.
The SD Card has a lock to prevent
the overwriting of stored data.
To lock the card, move
the tab to the position
shown in the diagram.
Recommended SD Card capacity to
be used: up to 512 MB
Inserting or removing an SD
Card
LOCK
Using the SD Memory Card Using the SD Memory Card
LOCK