Sanyo S750i Cell Phone User Manual


 
117116
Setting the phone to offline (Flight
Mode)
Flight Mode disables call, message,
WAP and other network related
functions although it is switched on.
This function is useful for when you
want to play a Java™ application on
an aircraft, where the phone should
not generate a radio signal. When the
mode is activated,
appears on the
display.
1 Open the Flight Mode Setting
display.
•Press [Menu] Phone
Settings Flight Mode Setting
2 Select ON and press O.
•To release the setting, select OFF
at this point.
Setting the display language, date
format or decimal format
1 Open the Language display.
•Press [Menu] Phone
Settings Language
2 To change the language, select
Display Language and press O.
To change the date format, select
Date Format and press O. To
change the decimal format, select
Decimal Format and press O.
3 Select the desired item and press
O.
Display Language: Selects from
English, Deutsch,
Français, and Italiano.
Date Format: Selects from DD/MM/
YYYY, DD.MM.YYYY or
YYYY-MM-DD.
Decimal Format: Selects from “.” or “,”
Setting heightened audibility and
better readability (Accessibility)
This function sets the character size to
the largest for situations such as when
you enter phone numbers, read
messages, search in Contacts, or
browse web pages. Also, the speaker
volume is set to the highest level so
you can hear the other party’s voice
better.
1 Open the Accessibility display.
•Press [Menu] Phone
Settings Accessibility
2 Press [OK] or O.
Selecting network area (Select
Network)
This function enables you to select the
mobile phone network area. The S750i
can roam dual network areas. So you
can use the phone in the UMTS
network area and/or the GSM
network. Making a list of network
operators and editing that list is also
possible. While editing you can also
prioritise the access order among
these operators.
Opening the Select Network display
•Press [Menu] Phone
Settings Select Network
Setting the network area
1 Select Select Network on the
Select Network display and press
O.
2 Select UMTS/GSM Dual, GSM
Only, or PCS Only and press O.
If you select UMTS/GSM Dual, the
phone always goes to the UMTS
network first.
Settings Settings