Filter
Top Products
131130
2 Select ON and press O.
•To release the setting, select
OFF.
3 Enter the answering time (1 to 29
seconds) and press O.
Setting Call Quality Alarm ON
If this function is activated, a beep
sounds when the signal strength falls
below the level suitable for communi-
cation during a call.
1 Open the Call Quality Alarm display.
•Press [Menu]
→ → Call
Settings
→ Call Quality Alarm
2 Select ON and press O.
•To release the setting, select
OFF.
Setting restrictions on calls (Call
Barring)
Call Barring enables blocking of
outgoing and/or incoming calls. The
Call Barring password is initially set to
1111. You can make an emergency
call even if Call Barring is set to ON.
Subscribing to the service centre is
required for the service.
1 Open the Call Barring display.
•Press [Menu] → → Call
Settings
→ Call Barring
2 Select Block Outgoing Calls or
Block Incoming Calls and press
O, and then select whether to
block the following types of calls.
Block Outgoing Calls: All Outgoing
Calls, Int’l except to
Home, or International
Calls
Block Incoming Calls: All Incoming
Calls or When Roaming
Notes: • If you want to confirm the current
settings of both call barring
services, select Check Setting in
step 2 above.
• If you want to set a new password
for roaming another service
network, select Set Password in
step 2 above.
Call Waiting
This supplementary service notifies
you of an incoming call from a third
party while talking with a second party
and enables you to answer the third
party by putting the second party on
hold.
1 Open the Call Waiting display.
•Press [Menu]
→ → Call
Settings
→ Call Waiting
2 Select Voice or Video Call and
press O.
3 Select ON and press O.
•To release the setting, select
OFF.
Settings Settings