Sanyo S750i Cell Phone User Manual


 
187186
Safety
Precautions
Note: For detailed instructions, view the
‘USB Storage Mode Guide’ from the
‘Service’ ‘Downloads’ section at
http://www.sanyo-mobile.com
You will need to install the S750i’s
USB driver on your PC before using
the USB cable and this function.
Cautions: While the phone is in the USB
Storage Mode, no incoming
calls or messages can be
received.
Only USB1.1 is available.
Data may become corrupted if
you do not follow the proper
procedures or instructions
that appear as a dialog
messages in the task tray.
Precautions when using the SD
Card and the USB Storage Mode
Disconnecting the USB cable or
removing the SD Card while the SD
Card is being accessed may cause
serious damage to the SD Card,
S750i and computer. There may be
some cases on Windows Me/98SE
computers in which the S750i device
is not indicated in the task tray but it
is connected and being accessed.
Make sure the SD Card is not being
accessed before removing either the
USB cable or SD Card.
Do not remove the battery pack
while transferring data.
Do not use a computer to modify,
move, or add data on the SD Card.
Ensure there is ample battery charge
remaining before using. Not doing so
may result in data errors or damage,
as well as possible problems with
your S750i.
Use an SD Card that has been
formatted on your S750i. SD Cards
that have been formatted on a
computer etc. may not be recogniz-
able on your S750i.
Do not turn off the computer’s power
switch or change to the standby
mode when using USB Storage
Mode. Doing so may result in not
being able to perform data transfer
even after rebooting your computer.
Connectivity