Filter
Top Products
1918
Entering text in Standard text input
mode
You can enter a letter in Standard text
input mode by pressing the numeric key
on which the letter is printed. To enter
the first letter indicated on the numeric
key, press the key once. To enter the
second letter, press the key twice, and
so on. If you want to enter letters that are
on the same numeric key, wait for a
second until the bar cursor appears
before entering the next letter so that
your phone can process the previous
letter.
For example:
(Change the input mode to Standard
input.)
•To enter the letter “o,” press 6 6
6.
•To enter the word “dog,” press 3,
666, 4.
•To enter the word “cat,” press
222, wait for a second,
press 2, and then press 8.
Entering text in T9 mode
The S750i supports a predictive text
input (T9) system that automatically
searches for and predicts the best
appropriate word by frequency of use.
You can thereby enter words much
faster and easier. When you are in T9
mode, just press each numeric key
once that contains the letters you want
to form a word. T9 then analyses your
key presses and attempts to complete
the word.
For example:
(Change the input mode to T9.)
•
To enter the word “Home”, press 4,
6, 6, 3. If your desired word
does not appear, press d or 0 to
display the word selection window.
Use the navigation keys to select
“home,” and press O.
Notes: •To accept the word as it is before
the word selection window
appears, the most common way
is to enter a space by pressing
n.
• If you do not see the right word
after pressing d from the T9 word
selection window, press the right
Soft key [Spell] to add the word to
the T9 dictionary. See below for
details.
Adding a word to the T9 dictionary
If you cannot find the right word in T9
mode use the following procedures to
enter the word. The word is added to
the T9 dictionary at the same time so
that you can find it the next time you
perform the same keystrokes.
1
After pressing d to display the word
selection window in T9 mode, press
[Spell]. The Add Word window
appears and the input mode is
changed to Standard text input
mode.
2 Enter the word following the
Standard text input procedure.
3 Press [Insert]. The word is entered
and also stored in the T9 dictionary.
Basic Operations Basic Operations