Filter
Top Products
156 Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Background tab
You can set a picture to be the background for the standby
screen.
1. Select if the flip closed or flip open background should be
changed.
2. Tap the image showing the current picture.
3. Browse to see picture files available on your P910i.
4. Select a picture and tap
Select
.
Read more about background in ‘Personalizing your P910i’ on
page 152.
Screen tab
You can set a picture to be the screen saver.
1. Select a picture for the screen saver.
2. Set the activation time for the screen saver.
If you select the
Screen saver device lock
check box the device
lock will activate when the delay runs out. Read more about the
device lock in ‘Device lock’ on page 43.
If you set a time for the
Automatic input lock
, the keyboard lock
will activate when the time runs out. Read more about the
automatic keylock in ‘Automatic keylock’ on page 44.
Occasionally you may find that you tap one item (for example a
button or menu option) but another is activated. Calibrating the
screen ensures that the correct item is activated. Tap
Calibrate
screen
and follow the instructions.
Power tab
You can set if the power save should switch off the screen, blank
the screen or show a clock on the screen. You can also set the
power save time between 1 and 30 minutes.
If you set times for both screen saver and power saver, the
power saver time will commence after the screen saver is
displayed.
You can set the screen light settings for handheld use and car
use.
Select
Adjust brightness
to set to set the normal (max) and
dimmed (min) light intensity for handheld use and car use. The
Brightness
box works as a slider.
Auto
Light switches on when you tap the screen, press a key, or
receive an incoming call
On
Light is always on
Off
Light is always off