Filter
Top Products
66 CommuniCorder
This is the Internet version of the user’s guide. © Print only for private use.
Taking pictures
You can take a picture with the flip open as well as closed.
To take a picture
1. Press the camera button to activate the CommuniCorder
application.
2. Rotate, if required, the Jog Dial to the desired mode.
3. Press again to capture the image on the screen. The picture is
automatically saved in
Pictures
.
You can also press the Jog Dial, the button, or when the
flip is open, tap the capture button at the bottom of the
screen to take a picture.
By default the pictures you take are stored internally in the
Unfiled
folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
a Memory Stick. See ‘Folders’ on page 29 for more information
on using folders.
To send a picture you have just taken in flip closed, select
Send
as MMS
from the flip closed context menu. In flip open, tap
.
Open the flip to access the full range of CommuniCorder
settings. With the flip open, you activate the CommuniCorder
by selecting
>
or pressing the camera button .
To view the last picture
1. Select
CommuniCorder > View picture
.
2. Select
Done
to return.
To delete the last picture
1. Select
CommuniCorder > Delete picture
.
2. Select
Delete
to delete the picture.
To delete a picture you have just taken in flip closed, select
Delete picture
from the flip closed context menu.
To manage or edit the picture, tap to go directly to
Pictures
.
See also ‘Pictures and Image editor’ on page 69.
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the picture is taken.
To set the delay time and the picture freeze time
1. Tap
CommuniCorder > Preferences.
2. Tap and set the desired delay time.
In this dialog box you can also set the picture freeze time. This
specifies the time the picture stays unchanged in the screen after
you have taken it.