Filter
Top Products
162 Control panel
This is the Internet version of the user’s guide. © Print only for private use.
Security
On the
Settings
tab you can set the Bluetooth security related
settings of your P910i.
Cable
Use
Cable
to set the cable connection mode and the connection
parameters used when communicating through your P910i's
cable port.
• Set the cable connection mode. Please note that you must set
the mode to
Modem
when using the P910i as a modem and
when using the DUN (Dial-up Networking) Wizard.
• Set the baud rate, parity, number of stop bits, character length
and type of flow control required for the connection. When
connecting your P910i via the desk stand to a USB port on
your PC, use the following (default) settings:
Tip You can set the cable connection mode when the flip is
closed by selecting
Applications >
Connections
>
Cable.
GSM Networks
This option lets you choose what network to use when you are
outside your operator’s area. Choose if you want to search for a
new network or use a preferred one. You can also make a list of
preferred networks.
•
Search mode
– Select between automatic or manual search for
a network.
•
Select network
– Tap the button to get a list of available
networks.
•
New search
– Tap the button to search for available networks.
Bluetooth on
All Bluetooth wireless technology functionality from
your P910i works. Visibility according to the
Visible
to other devices
setting.
Set Bluetooth to
Off
if you do not use Bluetooth, it
will decrease battery drain. Bluetooth will
automatically switch on if you use
Send as >
Bluetooth
from the applications
Visible to
other devices
Selected: All Bluetooth wireless technology
functionality from your P910i works.
Cleared: All Bluetooth wireless technology
functionality from your P910i works but you cannot
receive beamed items, and other devices cannot
initiate pairing with your P910i.
Baud rate
115200
Parity
None
Stop bits
1
Character length
8
Flow control
CTS/RTS