Filter
Top Products
2-4
Installing the MDW 9030P Pocketphone
– Installing a new radio module
– Connecting or disconnecting telephone line cords
– Adding a carrier
■
Use only the type of battery pack shipped with this product.
!
WARNING:
The rechargeable battery pack may contain elements that are harmful to the
environment (for example, nickel). Do not burn or puncture the battery pack. Like
other batteries of this type, if it is burned or punctured, it could release toxic
material which could cause injury. Do not dispose of it in household garbage.
For information about recycling or proper disposal, consult your local solid waste
(garbage) collection or disposal organization.
Additional Safety InstructionsAdditional Safety Instructions
Additional Safety InstructionsAdditional Safety Instructions
Additional Safety Instructions
for Installation Personnelfor Installation Personnel
for Installation Personnelfor Installation Personnel
for Installation Personnel
■
Install the product to meet all environmental and electrical requirements listed in
Appendix C.
■
All wiring that connects to this equipment and becomes part of the building wiring
must be a minimum of CLASS 2 or UL (Underwriters Laboratories) Listed Communica-
tions cable.
■
Do not install telephone wiring during a lightning storm.
■
Do not install telephone jacks in a wet location unless the jack is specifically designed
for wet locations. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
■
Use caution when installing or modifying telephone lines.
■
Install this product securely on a stable surface. Damage may result if the product
falls.
■
Never place this product near or over a radiator or heat register.
■
Slots and openings in the housing and the back or bottom are provided for ventilation.
To protect the housing from overheating, these openings must not be blocked or
covered. Therefore, do not place the product on a bed, sofa, rug, or other similar
surface. Also, do not place this product in an enclosed area unless proper ventilation
is provided.
■
Install this product in a protected location where no one can step on or trip over power
cords and telephone line cords. Do not place objects on the cords that may cause
damage or abrasion.
■
Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it. Do not overload wall outlets as this can
result in the risk of fire or electric shock. Do not staple or otherwise attach the power
cord to building surfaces.
■
Use only the power supply (Comcode 847713583) shipped with this product for the
battery charger.
■
Use only the power supply (Comcode 847523404) shipped with this product for the
radio module.